Hi Getting to the point of fitting the "pretty bits".
Does anyone have suggestions for body panel supplier other than GTS.
I need the taller version to cover a pinto.

Cheers
RD

Been looking into this myself recently:

http://www.locostbuilders.co.uk/viewthread.php?tid=95377

Procomp or Luego should be able to help you out, although I'm now planning on making stuff myself.

go on make it yourself, and when you have let me know ill come have a butchers im only in accrington

chris

Thanks Guys.............

Chris
Looks like it may be "make your own" my build has been a bit of a pig since the start, bought a part built project and nothing is right.

It would have been cheaper to start from scratch.......

Cheers
Dennis

If that avatar's your car with the Pinto in it already, why not make an ali bonnet and make/put a small scoop on?

dennis making your own is the way forward (i havent progressed that far yet) but if your stuck for material let me know, i work in bacup at a multi metal stockist

cheers
chris

Make your own bonnet out of ally, ours was good until we had 3 engine changes and several holes in the bonnet.

We're about to make another in a couple of weeks.

I have some photo's on my website which shows parts of the process. The bends were put in using a local lamp post.

Check pages 24-25.




HTH