Board logo

Hiss system,help PLEASE
loco spaniard - 13/12/05 at 03:21 PM

Hello all, I am new to the forum,I have a question that I hope I can get a positive answer;
I bought an ECU,receiver and keys (hiss system) for my 929rr fireblade engine...
Tried, cranking over and no spark,also tried with another loom and the problem persist, been told the problem is that the ECU does not recognise the key,but that's not all, I can't find the invoice....
Does anybody knows of any way to make it work?
Thanks in advance
Braulio

zzrpowerd-locost - 13/12/05 at 03:24 PM

Ask in the BEC section of do a search for HISS!

Think you can bypass it with a resistor somehow!

the_fbi - 13/12/05 at 08:49 PM

quote:
Originally posted by zzrpowerd-locost
Think you can bypass it with a resistor somehow!


See page 2
http://www.mkindy.com/misc/Fireblade_Tech_Tips_Wiring_the_Fireblade_engine.pdf

Also, there is a neutral switch which will need sorting out. It won't spark if in gear, afaik.

Also, there is a tilt switch, which will cut the engine if the bike has fallen over. I guess this will either need wiring out of the loom, or to be fitted and the correct way up.

[Edited on 13/12/05 by the_fbi]

scotlad - 14/12/05 at 08:41 AM

welcome to the madhouse Braulio!

loco spaniard - 14/12/05 at 01:51 PM

Hy guys thanks for your help, I'll try the BEC, I took care of the side stand,clutch sensor ....
I am downloading the information you send
thank you all and Happy Christmas