Board logo

sierra column switchs
M HIGGS - 21/1/07 at 07:39 PM

does anyone have an idiots guide to wiring sierra column switches into a premier wiring loom, have managed to wire the wiper switch , sidelights , dip & main beam relays but just cannont get the head light switch right .afterspending all day in the garage i thought it was time to ask for help

peterparsons - 21/1/07 at 07:58 PM

Hmm, good question, I'm reaching that stage soon and need help to. please share any info you get.

RazMan - 21/1/07 at 08:21 PM

Check my archive

blockhead_rich - 21/1/07 at 08:26 PM

A word of advice - please check what switches you have as some are +Ve switching and some are -Ve. My Luego wiring loom (including the relays) was opposite to the actual switches I had and it took me b***y ages to sort out the problem!!!

Rich

M HIGGS - 21/1/07 at 08:31 PM

enlighten me raz whats your advice

RazMan - 21/1/07 at 09:04 PM

quote:
Originally posted by M HIGGS
enlighten me raz whats your advice


My switches are -ve switching as are all of the later ones I believe. Sounds like you are nearly there as you have most of it sorted.
Hope that helps

[Edited on 21-1-07 by RazMan]

Deckman001 - 21/1/07 at 09:51 PM

The type of switching is indicated by the number marking of the switches, ie 87Bg or 90 Bg, I think there the numbers anyway, they are marked on the bottom of the switch gear

Jason