I have a setup station for 1/8 nitro buggy that does toe and camber, managed to sher off one of the crapy soft ally threads that bolt it all
together.
Went to my local nut&bolt place this morning and the closest thing he had to to it was a 4BA size, i would say its inbetween M3 and M4.
Its only a tad bit smaller than the 4BA with a very very slightly finer pitch.
Any ideas?
[Edited on 8/2/10 by Gav]
3.5mm?
Try one out of a switch/socket cover, these are 3.5mm.
[Edited on 8/2/10 by Confused but excited.]
quote:
Originally posted by Confused but excited.
3.5mm?
Bugger, must type faster.
Yeah the ones out of light switches are 4BA apparently
It's possible I may be able to find some at work tomorrow, I'll check to see and let you know.
Dave
Sounds like M3.5, which is 3.5mm x 0.6mm pitch compared to 4ba which is 3.9mm x 0.66mm
Try model suppliers such as THIS
Davie
Thanks davie i'll give that a try.
For reference:
http://www.engineeringtoolbox.com/metric-threads-d_777.html
As already said its probably M3.5 x 0.6 pitch.
I thought all electrical stuff was still 4BA? Or have they finally made the change to metric?
Sorry checked but no luck, have M2,2.5,3 & 4 but not 3.5
Cheers,
Dave
Thanks anyway