Anybody know where I might find a free copy of Bend Tech Software on the net.

Carl

I doupt youll get a free copy as the software key is very good.

Marc at MNR uses it for the Chassis development, roll cage and exhausts.

The install creates 1 key that needs to be sent to the software company for them to send you one back . The key will be different for each PC it installed on .

Think thats Right.

regrads

Agriv8

that means nothing

inventor uses the same stuff

and there are all over the place generators for it..

Tks

AutoCAD is the same and theres a generator for that to save people the few grand that it costs to buy.

well.... so Ive heard anyway not that I would dream of getting a program with a crack in it.

yep has a phone activated code also

quote:

---

and there are all over the place generators for it..

---

I'm buying some tube bending equipment at work and I just wanted to save a few quid. I also wanted to have a quick play with it to see if we really need it as we have two seats of Inventor CAD software.

Carl

hi carl if you are in the area i will show you it working, its very quick and simple to use normally 1 minute from input of measurements to instructions being printed, also does assemblies now so you can design a whole frame and split into sections tells you notches etc, also has reverse engineering and simulation to ensure no binding or damage to machine

best regards

marc

I just might take you you up on that offer Marc cheers I will be in touch.

Cheers Carl

There's a little program called bend it free to download which works out where to start your bends. It only does one plane but it works for roll bars and locost boot hoops.

[Edited on 7/11/06 by Peteff]

Marc I see you get everwhere Clicky

I will try that pete

Carl