Sorry never looked at their gallery before.
here
That top picture says BMW V12?
Looks like an RV8 wth bike carbs in a 7? Should go well!
Just noticed the V12 is in gallery 2.
[Edited on 11/7/07 by Danozeman]
Sorry never looked at their gallery before.
Just a few pics here of the bike carbs i got for my pinto a few weeks back from boggs, Stephen is a great guy who also fabricated up a handbrake and
gear stick surrounds. They will be going on after sva to replace the current pierburg carb. Sva is only 2 weeks away now!!
Boggs i can reccomend fully 
[Edited on 12/7/07 by iscmatt]
Just thinking, can anybody confirm these are indeed R1 bike carbs?
Cheers matt
quote:Oooh bugger, you're right! I did their website. I think i had beter change that!!
That top picture says BMW V12?
There work is top quality i get my locost set up there and i am always amazed with the standard of the bike carb conversions.
quote:
Originally posted by iscmatt
Just thinking, can anybody confirm these are indeed R1 bike carbs?
Cheers matt
They are bike carbs (similar to R1 Mikuni CVs). If R1, they will have had a TPS fitted, but it *may* have been removed if not needed as they
aren't a permanent fixture.
Nice quality fanimolds (and just down the road from me!). 
[Edited on 12/7/07 by Coose]
what is this TPS?
i'm very much a bike carb newbie!
TPS = Throttle Position Sensor.
There is one thing those pics prove if i see them right - the float bowls dont have to be level when fitting bike carbs. im now kind of wishing id
kept the carb tops level with rocker cover now for a potentially neater fit.
How easy is it to get to Boggs? What are the landmarks / distances (assuming driving down A1 or A19)?
quote:
Originally posted by DarrenW
There is one thing those pics prove if i see them right - the float bowls dont have to be level when fitting bike carbs. im now kind of wishing id kept the carb tops level with rocker cover now for a potentially neater fit.
How easy is it to get to Boggs? What are the landmarks / distances (assuming driving down A1 or A19)?
quote:
Originally posted by donut
quote:Oooh bugger, you're right! I did their website. I think i had beter change that!!
That top picture says BMW V12?
[Edited on 12/7/07 by donut]
Some very nice stuff on there
How nice are Boggs to talk to???? Iam highly impressed to say the least.
Im doing my conversion DIY style. They havent had a penny out of me so far. Phoned to quiz about RR appointment leadtime. Should be able to do in
about a week. Also advised me they dont do Timing work - which is OK as long as i know their scope. I then asked about getting the car to them and
offered to pay for the carb basic settings. They basically said no need to pay for that and told me what to do to set them up for basic running. The
bloke even went and got a set of ZZR carbs in front of him so he could explain precisely. Superb service and really really nice to talk to on the
phone.
i got an email back from steve at boggs today (great chap)
my carbs are from a kawasaki zzr1100
Well that explains the striking resemblance to my carbs then
Ive almost decided to go for a Boggs manifold now.
ill probs sell my current manifold to help pay for new one. Nowt wrong with it that i know of its just that im a name snob!!!