Board logo

Mini Cooper S bonnet vent.
nib1980 - 21/5/08 at 06:49 PM

Hi

anybody on here got a mini cooper S, I want a few dimensions of the Bonnet scoop.

I've had an Idea

Many thanks

Neil

jos - 21/5/08 at 06:59 PM

dont have one but know somebody who does and am seeing them tomorrow if you tell me what you want to measure

nib1980 - 21/5/08 at 07:06 PM

quote:
Originally posted by jos
dont have one but know somebody who does and am seeing them tomorrow if you tell me what you want to measure


basically width, depth and height, and if possible the install angle (if you knwo what I mean)

MANY thanks!!


Nib

jos - 21/5/08 at 07:13 PM

will have a look tomorrow

TGR-ECOSSE - 21/5/08 at 10:21 PM

The Mini Cooper S Does not have a bonnet scoop



Did you mean a BMW? If so sorry i don't have one i only do real Minis

iscmatt - 22/5/08 at 11:01 AM

If you do get one, this one is pretty smart (though maybe exspensive!)

LINK

Unfortunately this guy got a bit slated for this attempt


LINK


PS, sorry can't help with dimensions, i tried to quickly google it..

jos - 23/5/08 at 07:17 AM

Ok,

Looking from the front the top of open part of the vent before it starts to curve is 360mm wide. The middle is 385 wide (clear) and the bottom again before curve is 300mm wide.

Viewed from above the leading edge to the front of the top IYSWIM is 90mm and the moulding is 135mm O/A with the trailing edge (rear of the top) is 450mm O/A

HTH

nib1980 - 23/5/08 at 07:23 AM

Perfect !

Many thanks


Neil