This one.
Where for best price? does it have to be ford? specific ford?
How about this
Fleabay linky
i guess its not the engine thats important, but the carbs you have fitted
although, one from a sierra is probably a good start
link
the one you linked might be perfect though
[Edited on 17/3/10 by blakep82]
i believe most equipment uses standard solderless nipples.
I bought my bits from a bike shop: mountain bike brake cable, 2 solderless nipples and a cable adjuster for <£5 job done.
As above, if you're using something like a Weber DGAV carb then you'll need a cable with the right plastic clip on the carb end.
Not that familiar with other carbs, but I'm guessing they'll each have a specific fitting of some kind...?
quote:
Originally posted by blakep82
i guess its not the engine thats important, but the carbs you have fitted
although, one from a sierra is probably a good start
link
the one you linked might be perfect though
[Edited on 17/3/10 by blakep82]
quote:
Originally posted by cd.thomson
i believe most equipment uses standard solderless nipples.
I bought my bits from a bike shop: mountain bike brake cable, 2 solderless nipples and a cable adjuster for <£5 job done.
yes mate, definitely just get a bike brake cable if its just the inner that needs changing. They only cost pence from a bike shop or a couple of quid from halfords
+1 for bike cable
I know i know
This one.
quote:I like that idea.
Originally posted by l0rd
I know i know
This one.
Well quite practical I guess?
I mean.. it wouldn't snap would it!
FFTS - 17/3/10 at 04:04 PM
