Question for anyone who has used a Ford coil pack with a 4AGE - how have you mounted the coil pack and what HT leads did you use?

I just got my coil pack today and I'm finding it a bit of a struggle to suss out both of the above.

Thanks in advance (hopefully!).
Rich

P.S. 1st scrappy wanted £40 for the coil pack - I told him he was having a laugh.
Got it for £20 in the end with HT leads and wiring.

£20 I could have sold you the coil pack edis4 and the vr sensor all with conections for £25.

How it fits to the zetec

I mounted mine on the horizontal portion of the firewall. The leads were off a US market Escort.

Any chance that you could send me a couple of pic's? Also how long are your HT leads?

I'm thinking of making a bracket that attaches to the water outlet at the back of the engine - where the fuel pipes are usually bolted too in an Mr2 installation.

THis would allow me to use the std Toyota HT leads (I hope anyway).
Rich