Board logo

Zetec basics?
JohnN - 12/4/06 at 10:44 PM

Anybody know of a good site for describing the mods necessary to install a mondeo 2 litre zetec-e in a locost, mated to an MT75 gearbox? Sump issues/options, water pump issue, alternator location, starter motor etc etc etc


britishtrident - 13/4/06 at 07:46 AM

quite good info here -- actually front page to two different sites so explore both

ttp://www.zetec-cat.co.uk/


Danozeman - 13/4/06 at 08:37 AM

zetec cat is the best i think.

Basically you need a 1.8 escort/fiesta water pump, escort or choppped sump and sierra cvh starter (this may be different for the mt75). Then what ever ign and fuel system u choose to run it on.


Chaz - 13/4/06 at 10:32 AM

You can use your original starter motor from the MT75 when mating the Zetec to it.


Krismc - 13/4/06 at 08:30 PM

quote:

zetec cat is the best i think.

Basically you need a 1.8 escort/fiesta water pump, escort or choppped sump and sierra cvh starter (this may be different for the mt75). Then what ever ign and fuel system u choose to run it on.



What year water pump?? and anybody no a cheap place for modifiy my sump, in north east!

oh and ive got a type 9/blacktop with a lucas starter and xflow flywheel and clutch!! if that helps anyone


stevebubs - 14/4/06 at 04:25 PM

quote:
Originally posted by Krismc
quote:

zetec cat is the best i think.

Basically you need a 1.8 escort/fiesta water pump, escort or choppped sump and sierra cvh starter (this may be different for the mt75). Then what ever ign and fuel system u choose to run it on.



What year water pump?? and anybody no a cheap place for modifiy my sump, in north east!

oh and ive got a type 9/blacktop with a lucas starter and xflow flywheel and clutch!! if that helps anyone


Blacktop is significantly different....

http://www.toyne.org.uk/kit-car/mods-engine.html