Hi there got a manifold and r1 carbs from bogg brother can any one help me sort out the filters for it and the fuel pump as i am not that good with them .is there any one in the scunthorpe area who has them fitted so i can see them and get some advice
thanks alot paul

Your best bet is to get an R1 fuel pump from a carbed R1 to keep the pressure right without a regulator.

As for the filter ITG sausage filters fit the bill a treat and work better than individual socks.

Try an r1 pump of ebay. About £10 and designed for the job. Failing that webcon do a low presure (2psi) Hi flow pump for about £50.

Bogg Bro's could have done your filter at the same time but a custom fitted Pippercross filter is another £90 ish Pic here........

thanks mate how much do they cost and any ideas where i can get them from

Fuel filter


Fil ter BUT you will have to cut it out your self. Rally design do a budget one for around £50

we have zx9 carbs and megajolt fitted to a pinto. we live in south cave so not to far away. you are welcome to call anytime.

almost any carb'd bike fuel pump is fine, most seem to be made by mitsubishi anyway.