Paul27
|
posted on 11/11/20 at 09:03 AM |
|
|
Sierra Indicator Stalk Replacement
Hi,
I have a faulty indicator stalk on my Fisher Fury and I am having difficulty in sourcing a replacement.
The stalk is from a Sierra and has integral hazard warning switch so ideally I would like a direct replacement but they are difficult to get hold of.
Can anybody suggest an easily sourced alternative that would fit the existing column?
Many thanks
Paul
|
|
|
Mr Whippy
|
posted on 11/11/20 at 11:22 AM |
|
|
there's one here but not cheap
ebay linky
|
|
SteveWalker
|
posted on 11/11/20 at 11:38 AM |
|
|
Be careful. Check whether it is a mk1 stalk (square hazard switch) or mk2 (round). The mk1 switches things directly, while the mk2 is designed for
intervening relays and pin-outs/switching are different (IIRC). Oh and the mk1 has the horn push, while the mk2 doesn't (again IIRC).
[Edited on 11/11/20 by SteveWalker]
|
|
Paul27
|
posted on 11/11/20 at 01:48 PM |
|
|
Thanks, I will make a note of that, definitely the Mk1 that is required
|
|
jps
|
posted on 11/11/20 at 02:56 PM |
|
|
There is a Sierra breakers up in the North East - Sierras R US i think? Might be worth trying them, I would have thought Mk1 parts will be rarer.
|
|
Paul27
|
posted on 11/11/20 at 02:59 PM |
|
|
Thanks I will give them a try, the MK1 is indeed rare and going for silly money on e bay!
|
|
sonic
|
posted on 14/11/20 at 07:29 PM |
|
|
I have a Mk2 one I think, it has round hazard button but no horn. Don't know if you can convert it. Same fitting etc
|
|
Paul27
|
posted on 15/11/20 at 08:25 AM |
|
|
Hi thanks, ideally the MK1 which would be a direct replacement.
If I cannot source one either will either have to use a mk2 or fit a separate hazard warning flasher switch and relay because the flasher unit on the
Mk1 that is fitted does not work. Both mods would require dash removal and wiring mods so I will continue to look for a Mk1 for the time being.
Many thanks
Paul
|
|
rusty nuts
|
posted on 15/11/20 at 08:44 AM |
|
|
I have one or two Sierra indicators , I will check to see if I have any mk1 types over the next few days. Have you tried giving you switch a squirt of
WD40 ?
|
|
Paul27
|
posted on 15/11/20 at 09:11 AM |
|
|
Thanks, yes tried WD40 and contact cleaner.
|
|
mangogrooveworkshop
|
posted on 15/11/20 at 03:02 PM |
|
|
PUG 106 works fantastically
If you're still struggling drop me a line
|
|
Paul27
|
posted on 17/11/20 at 09:52 AM |
|
|
Ok will have a look, many thanks.
|
|