Peter Cowley
|
| posted on 20/3/05 at 04:30 PM |
|
|
xflow plug gap
does anybody know the plugs gap on my xlow 1660cc (aldon vaccumless points dizzy).
Cheers.
Peter. 
|
|
|
|
|
britishtrident
|
| posted on 20/3/05 at 04:53 PM |
|
|
Depends on the coil used
As a guide
Ford ballasted coil 0.032"
Lucas unballasted 12 volt 0.025"
|
|
|
gazza285
|
| posted on 20/3/05 at 04:54 PM |
|
|
I use the highly scientific "hacksaw blade" method. I set them so I can get the untoothed egde of the blade inbetween and call it right.
|
|
|
britishtrident
|
| posted on 20/3/05 at 07:23 PM |
|
|
quote:
Originally posted by gazza285
I use the highly scientific "hacksaw blade" method. I set them so I can get the untoothed egde of the blade inbetween and call it right.
As good a way to get 25 thou as any ------
|
|
|
Peter Cowley
|
| posted on 20/3/05 at 07:35 PM |
|
|
cheers chaps
I think its the second type - its a westfield loom with lucas coil - might have to check.
peter
|
|
|
gazza285
|
| posted on 20/3/05 at 07:35 PM |
|
|
Never failed yet. Lost all my feeler gauges more times than I've lost all my hacksaw blades (and bits of hacksaw blades).
|
|
|
Hornet
|
| posted on 20/3/05 at 09:04 PM |
|
|
plugs for a 1600 xflow 30 thou. Thats with an un ballested coil. (Straight from book)
|
|
|
