Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: anyone chipped there diesel?
mark.s

posted on 26/7/06 at 07:09 PM Reply With Quote
anyone chipped there diesel?

im looking for a chip up grade for my car, and waqs wondering if anone has any recomendations for chip suppliers or just what to look for

chees mark

View User's Profile View All Posts By User U2U Member
quinnj3

posted on 26/7/06 at 07:22 PM Reply With Quote
a guy came onto a building site i was on to do some plumbing or somethin. he had a brand new VW Transporter van which he had remapped. he said it was pushing out 170BHP! Don't know if he was right with that figure but he did say it spins up in 3rd gear in the wet no problem!. Someone else i know has had his GT TDI golf remapped form 130 to 160 a real rocket.





my aim is to build my own locost wether it takes me a week or 10 years to get started, i'm sure i will sometime

View User's Profile View All Posts By User U2U Member
Mad Dave

posted on 26/7/06 at 07:38 PM Reply With Quote
Try ccctech

Give Simon a shout. If I'm (very) lucky he might buy me a pint next time I see him

Dave

View User's Profile View All Posts By User U2U Member
Deckman001

posted on 26/7/06 at 07:59 PM Reply With Quote
Ned has a Bora that is a bit quicker as well I think






View User's Profile View All Posts By User U2U Member
Andy W

posted on 26/7/06 at 08:02 PM Reply With Quote
What car is it for?

Andy

View User's Profile View All Posts By User U2U Member
bimbleuk

posted on 26/7/06 at 08:26 PM Reply With Quote
My A4 with 158K miles on it has a Dragon diesel chip. Not up to modern diesels but went from 90BHP to 110BHP. Torque went from 130 lb ft to 165 lb ft. Driveability and mpg both improved.
View User's Profile View All Posts By User U2U Member
pajsh

posted on 26/7/06 at 08:36 PM Reply With Quote
I've just parted with a 150 BHP Bora which was a great car. Had something like 250+ lb/ft torque and could still turn in 45-50 mpg.

A guy I met reckoned he could chip it to around 200 BHP but I never tried it. With 150 BHP the ESP struggled to get the power on the road with 225 rubber.

Nice car though.





I used to be apathetic but now I just don't care.

View User's Profile E-Mail User View All Posts By User U2U Member
mark.s

posted on 26/7/06 at 08:36 PM Reply With Quote
quote:
Originally posted by Andy W
What car is it for?

Andy


325tds andy

View User's Profile View All Posts By User U2U Member
RazMan

posted on 26/7/06 at 09:37 PM Reply With Quote
My 325TDS was transformed with a Dragon module - wired in parallel to the ECU and a doddle to set up. It has a variable performance adjuster so you can dial in as much power as you like within reason.
The power went up to around 175bhp with buckets of torque - give the petrol version a run for its money and surprises a lot of so called sports cars

I got mine on eBay

[Edited on 26-7-06 by RazMan]





Cheers,
Raz

When thinking outside the box doesn't work any more, it's time to build a new box

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
graememk

posted on 26/7/06 at 09:44 PM Reply With Quote
i have a 3.0d 52 plate vectra with 220 bhp thanks to a corton miller rolling road

cost me £300

[Edited on 26/7/06 by graememk]






View User's Profile Visit User's Homepage View All Posts By User U2U Member
JohnN

posted on 26/7/06 at 09:57 PM Reply With Quote
My son had his Peugeot 306 tuned by the Dervdoctor a software re-map upped the 90BHP to 120 or so, they do further, more expensive add on chips & intercoolers would add even more power. The torque was an even greater % increase.
Worth a call, a very experienced busy guy.

View User's Profile E-Mail User View All Posts By User U2U Member
Danozeman

posted on 26/7/06 at 10:00 PM Reply With Quote
Im looking at one of these for my passat.

Theirs loads of places that remap them which is apparantly safer than shipping.





Dan

Built the purple peril!! Let the modifications begin!!

http://www.eastangliankitcars.co.uk

View User's Profile View All Posts By User U2U Member
macca1

posted on 26/7/06 at 10:41 PM Reply With Quote
"Try ccctech

Give Simon a shout. If I'm (very) lucky he might buy me a pint next time I see him

Dave"

I'll second that, I had my 2.5 vw transporter done from 102 to 135hp but its the torque increase thats the best bit.
Great service from Simon and was one of the cheapest.Also the system used is a USA based system and they have a forum on the website to discuss all convertions "warts n all"
Col

View User's Profile View All Posts By User U2U Member
graememk

posted on 26/7/06 at 10:46 PM Reply With Quote
if its a bmw you need to call rossiters, i had my old bmw done there ask for phil kelly, they are bmk gods, in norfolk not far from kings lynn 01485542000

[Edited on 26/7/06 by graememk]






View User's Profile Visit User's Homepage View All Posts By User U2U Member
ned

posted on 27/7/06 at 07:23 AM Reply With Quote
my pd115 bora is now around 140bhp, from memory i think its from these people: http://www.tunit.co.uk/ but Chris Gamlin did it when he owned the car. engine is now on 135k and going strong..

Ned.





beware, I've got yellow skin

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
mark.s

posted on 27/7/06 at 03:31 PM Reply With Quote
you lads are the bolux, ive sent off some emails from your recommendations, 175 bhp will do me fine,
cheers mark

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.