blakep82
|
| posted on 21/4/07 at 04:49 PM |
|
|
cortina stub axles
where's the best place to buy just the stub axles from a cortina upright? would ford dealer still be able to supply?
what sort of price should i expect?
also will granada hubs fit it?
cheers
Blake
[Edited on 21/4/07 by blakep82]
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
|
|
Confused but excited.
|
| posted on 21/4/07 at 07:00 PM |
|
|
There was a post some time ago about these for <£30. Check the suspension threads. Rorty uprights etc.
Tell them about the bent treacle edges!
|
|
|
blakep82
|
| posted on 21/4/07 at 08:15 PM |
|
|
can't find it... been in contact with rorty before to do my own uprights. I designed the whole suspension and wishbones, made them, and when i
put it all together the cortina uprights didn't quite work
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
Confused but excited.
|
| posted on 22/4/07 at 12:18 PM |
|
|
I can't find it either now.
If you contact 'marc n' though, he should be able to help. He was making Rorty designed uprights if I remember correctly.
Tell them about the bent treacle edges!
|
|
|
flak monkey
|
| posted on 22/4/07 at 01:05 PM |
|
|
Go to a local banger meet and ask around.  
Sera
http://www.motosera.com
|
|
|
blakep82
|
| posted on 22/4/07 at 01:24 PM |
|
|
no local banger races for me
they're on friday nites in cowdenbeith (about 2 hours drive) and by the time i'd get there after work it would be finished...
but the bloke i buy rod ends from has a lot to do with short oval stock racing, so i'll see if he knows!
Cheers
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
