New Barnet clutch fitted to 2003 R1.
Warmed engine up, started to hear a slight screaching. Blipped clutch and went, engaged first............. engine staled.
Couldnt get out of gear/neutral, so rocked car and eventually got neutral.
Any idea's?
I pressume the clutch needs adjusting?
Sounds like when you put the cover back on, the clutch bar (for want of a better/the correct word) was engaged too far, I had the other extreme when I
did mine and couldn't engage to clutch, loosened to cover and adjusted the bar
But yours sounds like you just need to adjust the clutch cable
[Edited on 8/1/10 by spdpug98]
Sounds like your new stiffer clutch needs a bit more pull before the clutch plates are separated. Maybe your clutch cable is stretching and/or needs
to be tightened to give more throw at clutch lever.
- Paul
hi there, sounds like your problem is adjustment only, i had a similar problem with my 5pw when upgrading to a barnett. i,m only just down the road from you and be glad to help if you need any.cheers paul.
Cheers guys,
Paul......... you have U2U
quote:
Originally posted by Major Stare
Cheers guys,
Paul......... you have U2U
quote:
Originally posted by progers
quote:
Originally posted by Major Stare
Cheers guys,
Paul......... you have U2U
Hi - no messages in my U2U inbox!