Hi All,
Does anyone have the set up details for the Luego Velocity please in terms of toe in front and rear, camber and castor angles etc. I thought the
figures were in the build manual I have, but I have searched high and low and can't seem to find them. My car is running standard Sierra running
gear.
Thanks in advance
Pete
I have the figures somewhere for my Luego Locost with IRS that Procomp set mine to if your not in a hurry . One thing they didn’t manage to do due to time restraints was to set the tracking on the rear, mine had a tiny bit of toe out which I managed to rectify by cutting shims out of shimstock to fit between the bearing carriers and the upright . Ready made shims are or were available
If you could dig out the info that would be really appreciated