Board logo

Locost Geo settings
Fandango - 12/1/20 at 03:23 PM

Hi all.

Have just replaced both lower wishbones on my Locost, after one broke on a trackday.

So now need to reset the camber, and steering alignment.

Car is 520 kgs, + c75kg driver.
Track only, no road use.
Using R888rs or slicks.

Can anyone recommend base setting for these, as I previously had all geo done at Procomp, but have mislaid the settings supplied at the time.

Cheers Carl


cosmicicecreamman - 14/1/20 at 12:30 PM

I would go 2 - 2.5 degrees neg camber and 15 minutes toe out for the front. I wouldn't get too hung up on the camber, spend your time getting the tracking right.