Board logo

Best edge trim for tight radius and 1.2mm panel
TimC - 8/4/18 at 05:48 PM

Hi all,

Anyone recommend anything specific to basically act like an open grommet on a 40-odd mm hole in an aluminium panel?

Ta

[Edited on 8/4/18 by TimC]


James24785 - 8/4/18 at 07:57 PM

I've got some quite small rubber "U" trim I've used on mine. Can send ya bit thru the post to try?


obfripper - 8/4/18 at 09:33 PM

VW part 1J0827417 is a 2 part blanking plug that would probably do the trick, it's approx 40-50mm off hand.
From a mk4 golf, mk5 polo and all the related cars.

Dave


harmchar - 8/4/18 at 09:41 PM

There's stuff on eBay called Neoprene blow hole rubber.
Any use?


TimC - 9/4/18 at 09:50 AM

quote:
Originally posted by harmchar
There's stuff on eBay called Neoprene blow hole rubber.



And the same to you!


Thanks all,