Hello all,
I have some new old stock cortina uprights, complete with hubs, disk, calipers, etc. They are not reconditioned they are new, the calipers maybe
reconditioned I'm not sure about that so I will say they are at least reconned if not new old stock as well. Disks are new with very light
surface rust, new pads pins and wheelnuts
I'm not sure on price but since tatty rusty complete sets seem to go for around a hundred these days
u2u me with an offer if your interested
I also have for sale a 7.5 2WD 3.62 lsd believed to be from a low mileage Sierra Cosworth, it has the 108mm lobro outputs, lobros, shafts not
included, I have taken of the the rear mount on the cover so this will suit a kit car but not the standard sierra install unless you can find another
rear cover.
There is no slop in the diff and when I took of the rear cover the oil was a crystal clear redish colour with no bits in the oil
£150
Clarke CHV12 12-Ton Hydraulic Pipe Bender
I have one of these pipe benders for sale
http://www.machinemart.co.uk/shop/product/details/chv12-12-ton-hydraulic-pipe-bender
Just to be clear this is a PIPE bender because it is supplied with PIPE bending formers, not suitable for thin stuff. £70
I'm based in Chandlers Ford, Hampshire items are probably pickup only due to weight
Cheers
David
Some pictures, the disks look a bit mankey but they are only very lightly rusted
And another one
u2u
Will you throw in the spices too?!
u2u re. calipers
Does the pipe bender weigh more than 25kg?
Chris
Chris I will check, it is a heavy lump that's for sure, will let you know
Cheers
David
quote:
Originally posted by R1minimagic
Will you throw in the spices too?!
quote:
Originally posted by ChrisW
Does the pipe bender weigh more than 25kg?
Chris