Board logo

Phoenix/Fury MSA Rollbar
davspeed - 26/4/18 at 06:52 AM

Having bought this from Jeff Wiltshire last year I have finally got round to trying to fit it. I found that it is a bit too narrow to look right on the striker, it could be made to fit it but it would bug me too much.

It is also looking less likely that I will want to do any more MSA events so I am putting it up for resale for what I paid for it (£200)
I can take I can take it to Stoneliegh preferably on the Sunday for viewing/collection.

I have measured it as best I could.

Tube diameter o/d 45.28mm
Feet 112x112mm
Outer width of hoop feet 980mm
Outer width of hoop at base 910mm
Hoop height from bottom of feet 415mm
Outer width of rear stays feet 965mm
Outer width of stays at base 880

I have some pictures of it against my striker roll bar for comparison if wanted.


goaty - 28/4/18 at 09:34 AM

Could this be posted?, asking for a friend with a fury


davspeed - 28/4/18 at 10:45 AM

We go down to Surrey site often so could take it with us.


goaty - 28/4/18 at 01:32 PM

Hi am Devon based now but have family in horley Surrey who could meet up and we can grab from them another day.
Let me ask my friend on it.
Any Pics?


davspeed - 29/4/18 at 10:39 AM

Pictures.

Bar 1
Bar 1


bar
bar


jeffw - 29/4/18 at 06:20 PM

Very expensive bit of kit, cost me a fortune. Fury Sportscars will be able to advise on what you need to do to mount it to a Striker/Phoenix or a Fury.


davspeed - 20/7/18 at 09:34 AM

I still have this, It's getting in my way a bit so price reduced to £150 collected. 3 miles from Blyton park.


davspeed - 13/3/19 at 11:33 AM

Bump, still got it.


davspeed - 14/2/20 at 11:26 AM

Just giving this another bump in case any body is interested, can't bring myself to scrap it.