Board logo

exhaust tip for r1 carbon can wanted
sdh2903 - 20/4/12 at 02:09 PM

As above i'm after a 90 degree stainless tip with a rolled end for my R1 can. Like this:



I know people have made their own by welding a ring onto a 90 but I dont have a tig welder so need one made, I was going to have a bash using a mig with the right wire and gas but I have a feeling I will make a pigs ear of it.

cheers
Steve

joemotion - 20/4/12 at 04:19 PM

There is a chap on here who made one for me but can't remember his name. I will have a look later when back home.

sdh2903 - 20/4/12 at 04:59 PM

cheers, that would be great.

maccmike - 20/4/12 at 05:16 PM

JP exhausts in cheshire will make one

joemotion - 20/4/12 at 05:29 PM

It was Andy W on this forum

ReMan - 20/4/12 at 05:39 PM

NICE CAR!

I've had two and I'm sure I got them both of Ebay, but I can;t find anyone selling them at the moment.
You gan get them without rolled end, if its not for IVA?

ReMan - 20/4/12 at 05:41 PM

BTW the bit that is welded is hidden behind theehauast end trim, so you can do it with a normal m/s MIG good enough

sdh2903 - 20/4/12 at 08:00 PM

quote:
Originally posted by ReMan
NICE CAR!

I've had two and I'm sure I got them both of Ebay, but I can;t find anyone selling them at the moment.
You gan get them without rolled end, if its not for IVA?


I know its nice it took a lot of my effort to build it

I've scoured Ebay and the t'internet today while I was supposed to be working but couldn't find anything.

I've U2u'd Andy w to see if he still does them, cheers for the info

renetom - 23/4/12 at 05:40 PM

Hi
We used a 2" S/steel elbow & a straight chrome rolled in tip, pop rivetted
Passed IVA ok
both available on ebay
Ours is not an RI can, but I think is the same size, see our photo archive.
good luck.
René