There have been a number of discussions on here about which type of paint to use, one which is often recommended as being safe and easy for home use
is water based. I have in the past sprayed my car with Cellulose with few problems, but now I want to respray and I am wondering if I should be
considering water based ??
My main question is what primer and what clear coat to use with these, there are lots of mentions of using 2K clear but surely this defeats the object
of using water based for safety reasons ?? I would be greatful if somebody could point me in the direction of primer and clear which can be used with
water based and are safe for home use.
Thanks,
John
i think you'll find that the only clearcoats available are 1k and 2k and yes it does make a mockery of the whole goody two shoes water based thing, we use 1k or 2k primer, water based colour then lacquer of either type depending on what we are doing,
doesn't water based mean it will just run off if it gets wet?
i think water based is still very expensive too isn't it?
i get water based for £50 a litre and solvent based for £55 a litre...
you need lots of warm air and a dry area to paint it, and then 2k laquer to finish it... octoral ms 2:1 with a fast hardener and 10% thinners works
best i have found...
you may find that if you dont want mettalic then a good 2k commercial paint is best....
also its the solvent in the base coat that is said to cause enviromental issues and not the cyanide content in the lacquer...
quote:
Originally posted by boggle
also its the solvent in the base coat that is said to cause enviromental issues and not the cyanide content in the lacquer...