Board logo

Tonou covers
simon04 - 19/4/21 at 09:20 PM

Hi all,
I'm looking for a tonou cover for my striker.
Anyone have recommendations for purpose made or where I can by the material and make one myself?

Thanks


adithorp - 19/4/21 at 10:16 PM

Woolies sell all the stuff you'll need.
https://www.woolies-trim.co.uk/

I bought double-duck fabric and Tenex fasteners. Then I taped a piece of curtain material over the cockpit and marked around the outline that I wanted. Then I took that as a pattern to a local upholsterer and he made up a tonneau complete with centre zip. I added the fasteners after.


jester - 19/4/21 at 11:53 PM

quote:
Originally posted by adithorp
Woolies sell all the stuff you'll need.
https://www.woolies-trim.co.uk/

I bought double-duck fabric and Tenex fasteners. Then I taped a piece of curtain material over the cockpit and marked around the outline that I wanted. Then I took that as a pattern to a local upholsterer and he made up a tonneau complete with centre zip. I added the fasteners after.






Second that for woolies have allways had excellent service from them


Myke 2463 - 20/4/21 at 06:37 AM

If you want to make one try these, https://www.profabrics.co.uk/pages/fabric-marine.


peter030371 - 20/4/21 at 11:28 AM

This thread might be of interest http://www.locostbuilders.co.uk/viewthread.php?tid=217595


bi22le - 20/4/21 at 11:02 PM

MK ( new raw owners) will probably sell you one, or use the suppliers mentioned and have a crack yourself, or I can make you one.

I use thick 500g clear plastic sheet as a template and Mark it up / cut with a Sharpie. Make it a tiny bit short on outside dims and let the material stretch for a nice tight finish.

If it's a striker and you don't have doors then the sides might be tough to work out, but that's where the cheap plastic template comes in.