Looking for a 3 wire 'D' Type Drive Throttle Position Sensor

Have Had issues with the COLVERN ones in the past not lasting and causing fuelling issues etc


Has anybody found a Good solid reliable one and if you have where from ?

Wondered if anybody had found one off a normal production car that could be used ?

Looked at the 'Contactless' ones and although i beleive they're very good, there also around £100 a go

I would be having a look at the rover K series tps. Depends on the scrapie but I recon I would get a handfull for a fiver at my local.




[Edited on 3/7/11 by big_wasa]

i have got one of those if you want it.

/ that looks a lot like the one on my Triumph throttle bodies - I've got a few of those spare since I use two sets for a V6 , and remove one to fit the linkage - I could bung one in the post ?

The Ford ones are pretty good - Duratec ones can be clockwise or anti clockwise depending on models.

colvern ones can cause problems over time.

want reliability and accuracy? try a penny and giles sensor. (around £90)


- colin