Board logo

Quick Mega Squirt Question
IainL - 23/6/13 at 06:34 PM

Has anyone used the mega squirt V3 on a Zetec 1.8?
Cheers
Iain

coozer - 23/6/13 at 06:36 PM

Yes mate, I did...

IainL - 23/6/13 at 07:02 PM

quote:
Originally posted by coozer
Yes mate, I did...


What do you think of it, is it any good?

big-vee-twin - 23/6/13 at 07:55 PM

I built my MS from a kit bought from DIYAutotune it was a straightforward job.

The MS is a good piece of kit but has a steep learning curve, but gives you the opportunity to fully understand ignition systems and to learn about tuning and mapping

ashg - 23/6/13 at 08:44 PM

quote:
Originally posted by coozer
Yes mate, I did...


i thought you had a ms2 on a v3 board?


the latest and greatest is a ms3 on a v3 board..

i have an ms3 with ms3x on a v3 board running my saab 2.0 turbo engine and it is far superior to a ms2.

that said an ms2 will very happily run a zetec and will save you quite a bit of money.


all i can say is dont buy one if you just want to wire it up and use it, the learning curve is mega! and rate of success is very low without weeks/months/years of reading/learning.

if you just want to wire something up and take it to be mapped get an omex/emerald etc.