I have just changed to a digital dash, and all the warning lights are working etc. When I turn the ignition off the engine keeps running. I have tracked this to the Alternator warning light feed. Voltages are correct 0v when ign on / warning light on and 13.5 v /light off with engine on tickover. I have seen some info online about this and one of the fixes is to put a diode in line before the warning light, however some articles say that this could cause damage to the alternator. It was working fine before I changed over to digital dash, and I have changed no other electrical items or wiring.

does the digidash use an led rather then a conventional bulb?

as above ^^^^, try changing the bulb for a normal one or putting a normal bulb in line with the LED, that should sort it oot

Is it a Denso unit?

No its not a denso unit, std K series rover.

Do you have any part numbers?

MikeF

You must give my Friend Starterman all the info, he is wicked at sorting this stuff out, and his buisness is starters and alternators, probably a lot more! all positive reviews

He doesnt charge for the info on here hahahahaha