Ok so i have an ifor williams trailer model type LM105. It does not have the loading skids BUT it would be usefull to have some made.
I could have this done where I work if I had the dimensions and steel thickness etc.
So over to the collective does anyone have the required items that they'd be good enough to measure for me and give me the fold dimensions/thickness..
As normal many many thanks in advance.

I can measure mine, 10 x 6 tipper, depends on the trailer you have, post a pic and I'll see what I can do.

looks like they are 8ft long but any info would be goos especially the folding dimensions and thickness.
My model is the lm105 flatbed with removeable sides and is 10ft by 5ft with wheels under and 2700kg gross non tipping.
Many thanks.

[Edited on 28/7/15 by omega 24 v6]
[img]http://www.helpfulhirings.co.uk/sites/default/files/styles/large/public/flatbed-trailer-10-x-5-c-w-sides-and-6-ramps-926-p.jpg?itok=mJU5hx2u[/img ]

[Edited on 28/7/15 by omega 24 v6]

What year is your trailer? The early ramps hook on a channel on the back, newer ones hook on the the mechanism that locks the tailboard.... I have both sorts!!'

Not sure of age ( how do you tell from the chassis no) but hook on channel type by the looks of it.

I'll have a measure in the morning when the carlesburg has done its. Job!

Any luck?? Or is the Carlsberg still working LOL