Board logo

Type 9 Dimensions/Technical Drawings
Tralfaz - 15/5/09 at 10:17 AM

Hi,

Does anyone have any technical drawings of a Type 9?


Thanks

Brian

stevec - 15/5/09 at 10:25 AM

I have a drawing at home, I will post it when I get there later today if no one else does.
Steve,

chrisg - 15/5/09 at 10:51 AM

I thought I had but it turns out to be an MT75!

Cheers

Chris

stevec - 15/5/09 at 01:18 PM

Hope this helps. Sorry its really big! And remember some have different input shaft lengths, V6 I believe which also has a better first gear ratio.
Steve.





[Edited on 15/5/09 by stevec] Rescued attachment TYPE 9 DIMENSIONS.gif
Rescued attachment TYPE 9 DIMENSIONS.gif

ss1turbo - 15/5/09 at 07:48 PM

quote:
Originally posted by chrisg
I thought I had but it turns out to be an MT75!

Cheers

Chris


Any chance of a copy, Chris? Could do with one to do a comparison with the type 9 (when that pops up) as i've got a narrow-ish chassis to swap the T9 to an MT75 and need to know where I need to get angry with Mr. Angle Grinder..if at all!

chrisg - 15/5/09 at 08:09 PM

No problem mate, it's in my bucket of photos

here

Cheers

Chris

ss1turbo - 15/5/09 at 10:19 PM

Cheers Chris - thats a HUGE help! Sorry to hijack - but anyone got one of a T5 (Cosworth) box and a 7" diff as well...?

Tralfaz - 17/5/09 at 11:03 AM

Thanks