Board logo

Alloy t piece
Danozeman - 3/3/16 at 12:06 PM

Im after one of these with 2 pipes one. does any one know where I can get one? 32mm wih 2 18mm or 16mm pipes.

pipe
pipe

pewe - 3/3/16 at 12:34 PM

Car Builder Solutions offer a 32mm with a tappable T if that helps?

linky

Cheers, Pewe10

britishtrident - 3/3/16 at 02:38 PM

Rover used a 32 -16-32 hard plastic Tee on the 75/ZT bottom rad hose.

ash_hammond - 3/3/16 at 02:42 PM

ASH Hoses.

http://www.autosiliconehoses.com/

mcerd1 - 3/3/16 at 03:05 PM

quote:
Originally posted by Danozeman
Im after one of these with 2 pipes one. does any one know where I can get one? 32mm wih 2 18mm or 16mm pipes.


do you mean 32mm strait through with 2 separate 18/16mm outlets ?

You could get one with a single tee - then a second tee at the smaller diameter

or you could try and find some of these the right size:


and fit them to something like this:
http://www.carbuildersolutions.com/uk/in-line-temp-sender-housingair-bleeddrain-32mm

02GF74 - 3/3/16 at 07:37 PM

I dont believe what you are looking for alloy t-piece with two outlets exists off the shelf.

Option is use two t pieces or make one, either from scratch or from an existing t piece.

Danozeman - 3/3/16 at 09:44 PM

That's what im finding 02GF74. Tiger list one with 2 outlets but don't stock it any more.

My problem is I have a zetec and I need to put 2 pipes into the bottom hose. What have others used?

HowardB - 3/3/16 at 10:18 PM

Use the original pump outlet hose (Mondeo). It has a T, then T again from that. Hope that helps

wombat - 3/3/16 at 11:09 PM

Pepperperformanceccose on eBay offer individual T with both 16mm and 19mm outlets.
I have asked them to quote for a one piece solution.
PM sent