Can anyone confirm if this is a silvertop zetec dipstick?

Ford Zetec Dipstick Pipe

My block has the seal in the housing rather than the black top version which was on the end of the dipstick tube?

Happy to be corrected if I'm wrong

Thanks

Yes that's a silver top dip tube. As you say the black top has two beads rolled onto it to retain the O ring.

There are at least three different silver top tubes depending on manifold.

i will be using a 4 branch manifold, so I assume it will most likely not matter what which one I use?

Can I not just cut the bead off the end of a blacktop one? Already have a blacktop one!

Thanks

quote:

---

Originally posted by ttalps2000
i will be using a 4 branch manifold, so I assume it will most likely not matter what which one I use?

Can I not just cut the bead off the end of a blacktop one? Already have a blacktop one!

Thanks

---

shorted each the same and should be ok?!

I have one spare

Would you like to sell it?

Yes why not. Where are you?

U2U sent

quote:

---

Originally posted by ttalps2000
shorted each the same and should be ok?!

---