Board logo

mondeo st220
MootchA - 20/5/22 at 02:24 PM

would anybody have the height of an st220 lower inlet manifold please, i can find lots of pics but no dimensions.

[Edited on 20/5/22 by MootchA]

Oddified - 20/5/22 at 07:52 PM

I have one, i'll measure it tomorrow

Oddified - 21/5/22 at 05:39 PM

The aluminium lower inlet manifold is 59mm high, but also the top/bottom gaskets for it are 3mm thick if that's relevant.

Regards, Ian

MootchA - 21/5/22 at 07:04 PM

cheers ian, thanks