Board logo

Crossflow oil return tube
RoyM - 26/5/22 at 10:52 AM

Rebuilding my 681F block (it's for my Marcos so wanted to retain original type block) and a little stuck. I butchered the oil return tube (the plain tube from the oil pump into the sump not the pickup pipe) getting it out and need to source another. It's just a plain pipe so would a 3/8 stainless pipe cut to length do or should I try and source an original?


Mr Whippy - 26/5/22 at 04:02 PM

you know you want to add some bling go for the stainless

I wish I'd bought a Marcos, their really expensive now

[Edited on 26/5/22 by Mr Whippy]


RoyM - 26/5/22 at 04:36 PM

quote:
Originally posted by Mr Whippy
you know you want to add some bling go for the stainless

I wish I'd bought a Marcos, their really expensive now

[Edited on 26/5/22 by Mr Whippy]


Bit of a waste really given that it will spend it's life hidden in a sump covered with oil!! (I hope)