Barronge
|
| posted on 5/8/10 at 12:00 PM |
|
|
Where to buy a Zetec exhaust???
Hello,
Just sorted out my rad, ECU and other bits for the engine, i was wondering if anyone knew of a decent company that supplies a complete Zetec exhaust
for a silvertop engine.
The cheaper the better obviously lol
|
|
|
|
|
Mal
|
| posted on 5/8/10 at 12:12 PM |
|
|
Not necessarily cheap, but you could start by looking in Westfield Sportscar's online shop.
|
|
|
MikeR
|
| posted on 5/8/10 at 12:27 PM |
|
|
define complete? if you can weld you can get the parts from robin hood.
define cheap? MK will make one (along with a few others).
|
|
|
Barronge
|
| posted on 5/8/10 at 12:42 PM |
|
|
Complete as in everything pre built and ready to fit and cheap as in not Westfield or caterham lol
|
|
|
FrankP
|
| posted on 5/8/10 at 12:53 PM |
|
|
I got my manifold and exhaust from robin hood.
Passed the IVA with them.
Didn't need any welding.
Cheers
Frank
|
|
|
loggyboy
|
| posted on 5/8/10 at 12:54 PM |
|
|
Trouble is a complete exhaust will need to be made up to suit indivdual vehcles, based on engine position, angle and exit point. Buying an 'off
the shelf' one from mk/raw etc may end up not suiting your car.
Maybe better of speaking to a specialist menufacturer?
|
|
|
Barronge
|
| posted on 5/8/10 at 02:04 PM |
|
|
Good point..... new question then, does anyone know anyone who can make them???
|
|
|
dan8400
|
| posted on 5/8/10 at 03:08 PM |
|
|
Tiger have them on the shelf. Mine sounds awesome 
Dan
Hey - That's Journey!!!
|
|
|
Jasongray5
|
| posted on 5/8/10 at 03:31 PM |
|
|
Adapt an st170 manifold?
How hard can it be?
http://www.flickr.com/photos/33261515@N03/sets/72157611049241239/
|
|
|
big_wasa
|
| posted on 5/8/10 at 04:00 PM |
|
|
I really would NOT buy the tiger manifold.. Mine is from Fisher sports cars but I did need to make up a link pipe.
|
|
|
norfolkluego
|
| posted on 5/8/10 at 05:55 PM |
|
|
quote:
Originally posted by big_wasa
I really would NOT buy the tiger manifold.. Mine is from Fisher sports cars but I did need to make up a link pipe.
I bought my manifold from Fisher (already had the rest of it), nice bit of kit and not too pricey. Our local fabricators (who do a good job I must
admit) wanted almost twice as much as Fisher for the manifold.
|
|
|
dan8400
|
| posted on 5/8/10 at 06:05 PM |
|
|
Can I ask why not the tiger exhaust? I'm not trying to cause an arguement I'm just curious. Have you had a bad experience with them?
I only ask because my system is well made and slots together a treat. Not to mention the sound, which is awesome
Hey - That's Journey!!!
|
|
|
Barronge
|
| posted on 5/8/10 at 07:07 PM |
|
|
You see I like the tiger exhaust... But I also like the fisher exhaust.. But which is best, there's only one way to find
out.................FIGHT!!!!!!
Seriosly though how much was the fisher
|
|
|
big_wasa
|
| posted on 5/8/10 at 08:40 PM |
|
|
Ive owned both.
With the tiger the quality and the welding was very poor but its did fit together just.
BUT it exits where the diagonal bars are in a locost. You will end up choping the chassis for it.
|
|
|
coozer
|
| posted on 5/8/10 at 08:47 PM |
|
|
Got mine here....
http://www.aas-exhausts.co.uk/
Highly recommended.
1972 V8 Jago
1980 Z750
|
|
|
