mattyc
|
posted on 6/11/10 at 07:31 PM |
|
|
1.6 Ford Cross flow Engine.
I’m in the middle of removing my 1.6 Ford Cross flow Engine set up from my locost, so it’s now redundant. I was still using my car up until last week
and still makes good useable power ( only changing because I’m a young hot headed male) both the engine and box will be removed by Saturday next week
and I would like it gone as soon as possible.
It has a standard webber carb on it and as mentioned above all running well. I also have boxes of bits such as spare alternators, heads, exhaust
manifolds and rockers plus loads of other bits and bobs.
I’m looking for around £100 for the lot.
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
marcjagman
|
posted on 6/11/10 at 08:01 PM |
|
|
That's a good price, if I lived a bit closer would have it.
|
|
Confused but excited.
|
posted on 6/11/10 at 09:15 PM |
|
|
Good price? That's a steal.
Wish I lived closer too.
Tell them about the bent treacle edges!
|
|
mangogrooveworkshop
|
posted on 7/11/10 at 11:02 AM |
|
|
put it on the classic ford forums ......they will take it off your hands
|
|
goodguydrew
|
posted on 7/11/10 at 03:31 PM |
|
|
I would take it if you were not so far away. I have a 1.3, but would prefer a 1.6 or Zetec.
|
|
mattyc
|
posted on 22/11/10 at 06:15 PM |
|
|
just thought i post a bit more information. The block is 711M type comes with every thing you need to get it running, also have the prop shaft aswell.
|
|
Mike Wood
|
posted on 12/12/10 at 08:53 AM |
|
|
Hi
Have you sold this?
Thanks
Mike
|
|
montythemole
|
posted on 15/12/10 at 02:54 PM |
|
|
Also interested if still available?
1985 Dutton Phaeton Series 3 1300GT
|
|
mattyc
|
posted on 15/12/10 at 07:09 PM |
|
|
why is it always the same you spend ages trying to get rid of something and the everyone wants it!! The engine is now gone.
|
|