goodall
|
| posted on 14/1/11 at 04:56 PM |
|
|
Saab 900 upright for IRS
After abit of searching about hibs to use for IRS I found this thread
http://www.teamswift.net/viewtopic.ph
p?f=6&t=45505&sid=4d024d6da8a8bb9f5bfba53df250420e&start=0 and this picture
There saab 900 front hubs and look perfect for use in IRS anyone have any info have done a few searches but cant find anything else using them other
people talking about using them on here and on locostusa, oh and late models had 4x108mm bolt pattern...
|
|
|
|
|
TQ_uk
|
| posted on 14/1/11 at 05:05 PM |
|
|
Why not MX5 (rear)? Is 108 PCD important for you?
What diff you using?
|
|
|
goodall
|
| posted on 14/1/11 at 05:20 PM |
|
|
Nah 108 aint important to me as front going be 4x100, thinking that might interested people using sierra parts
Hadent seen MX5 hubs cheap, until an ebay search 5 mins ago
But have seen the saab hubs for as little as £10
Planning using a audi quattro diff I have, got a diff lock so can drift about using it yet flick a switch diff is open and car would have manners
|
|
|
TQ_uk
|
| posted on 14/1/11 at 05:24 PM |
|
|
The (4 stud) MX5's are 4x100 I believe (not an expert on this but am likewise researching), plus if you got a whole rear end no issue of mating
different make driveshafts to diff etc, plus less complicated then making up an arm to prevent a front hub steering...
HTH
|
|
|
