avagolen
|
| posted on 11/2/11 at 10:13 PM |
|
|
Spigot bearing
Hi All,
Just a more than likely silly question.
Is the spigot bearing to fit a silver top to a type 9 the standard Sierra one?
Thanks in anticipation.
Len.
The Answer for everything, but never the last word....
|
|
|
|
|
austin man
|
| posted on 11/2/11 at 10:30 PM |
|
|
think its different on the external size bought mine from a retro ford spares place
Life is like a bowl of fruit, funny how all the weird looking ones are left alone
|
|
|
paulf
|
| posted on 11/2/11 at 10:32 PM |
|
|
Its a standard sierra one available from a ford dealer or motor factors.
Paul
|
|
|
avagolen
|
| posted on 11/2/11 at 10:32 PM |
|
|
Thanks, any idea of part numbers , sizes etc
Did you ask for Zetc to type 9?
Len.
The Answer for everything, but never the last word....
|
|
|
avagolen
|
| posted on 11/2/11 at 10:33 PM |
|
|
Thanks Paul.
The Answer for everything, but never the last word....
|
|
|
paulf
|
| posted on 11/2/11 at 11:07 PM |
|
|
Quinton hazell QSB 101 Just checked on a packet in workshop.
Paul
|
|
|
snapper
|
| posted on 11/2/11 at 11:13 PM |
|
|
This thread sparked a train of logic, or not as tha case may be....
Type 9 fitted to Pinto, same as Cosworth
MT75 fitted to Cosworth
MT75 fitted to Zetec
Therefore Zetec spigot bearing will fit for Type 9 gearbox.
I know there is a slight gap in the logic stream but I also know people have fitted both gearboxes straight on to the Zetec.
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
mrwibble
|
| posted on 12/2/11 at 09:56 AM |
|
|
i had it in mind it was a cortina item, however mr paul toyne zetec cat website states it as: "FINIS code 1554973."
|
|
|
westy turbo
|
| posted on 12/2/11 at 10:30 AM |
|
|
FORD SIERRA TYPE 9 5 sp GEARBOX SPIGOT / CRANK BEARING on eBay (end time 18-Feb-11 21:40:41 GMT)
|
|
|
avagolen
|
| posted on 12/2/11 at 05:32 PM |
|
|
Thanks guys.
All very helpfull.
I have purchased the Ebay one.
Len.
The Answer for everything, but never the last word....
|
|
|
westy turbo
|
| posted on 12/2/11 at 09:16 PM |
|
|
Nice to see ur Greek avatar!how come?
|
|
|
avagolen
|
| posted on 13/2/11 at 10:29 PM |
|
|
Hello Westy Turbo, the answer to your question is that I am a Christian
and it is a symbol that is / has been used by Christians all over the world
to signify there faith. The fish symbol is the one you have proberly seen on
the back of lots of cars and the letters are pronounced 'Ichthys' in English
and the translation is shown below.
I - Iesous - Jesus
X - Christos - Christ
O - Theou - God's
Y - Yios - Son
E - Soter - Savior
Thanks for asking.
Len.
The Answer for everything, but never the last word....
|
|
|
westy turbo
|
| posted on 15/2/11 at 09:05 PM |
|
|
I know,iam Greek  Good to have someone like you Len and your believes,even if you are far away 
|
|
|
avagolen
|
| posted on 17/2/11 at 04:54 PM |
|
|
You are most welcome.
Len.
The Answer for everything, but never the last word....
|
|
|
.jpg)
.jpg)
