DH2
|
| posted on 3/7/13 at 10:08 AM |
|
|
Misc Parts
Got a few random bits to sell on...
Roll Bar
Following an upgrade to a full cage, I have the roll bar from my Stylus for sale.
 
Overall height = 500mm.
Overall width = 930mm, width of hoop = 820mm, width between fitting plates on rear braces = 895mm.
Should fit all Stylus chassis without problem, and I suspect would fit a Fury chassis too. Could obviously be modified to fit any other vehicle - if
you want some extra measuring to check, let me know.
In overall good condition, though some scratches to powder coating.
Open to sane offers above scrap weigh-in value.
MX-5 Handbrake Lever
Due to change of plan on what I am using. Complete with all plastics, and in good condition.
£15 posted.
Sierra Steering Column
Again, changed my plan to using an MX-5 donor part. Steering lock has been removed (due to no key), but stalk and cowl mounts remain. Otherwise
complete and in good condition. Also lower link column with triangular and sliding joints.
£40 posted.
Sierra Column Bushes
Brand new QH replacement upper column bush kit.
Also a brand new 1" bore pillow block housed bearing to replace the OEM bearing (the OEM plastic triangular bush fits perfectly into this
bearing).
£20 posted.
Caterham Tillett Seat Mount
A pair of genuine Caterham GRP seat mounts with fixings, removed from Tillett seat.
£15 posted.
More to follow once I get a bit further with my rebuild...
DH2
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
DH2
|
| posted on 16/7/13 at 07:38 AM |
|
|
BTTT
|
|
|
RichardK
|
| posted on 16/7/13 at 10:22 AM |
|
|
I'll take the Sierra Column Bushes if its still available please.
Cheers
Rich
Gallery updated 11/01/2011
|
|
|
RichardK
|
| posted on 18/7/13 at 09:36 AM |
|
|
Are they for sale, let me know to send the money to and I'll tell the address to send them to, it is a UK addy, I have a parts mule that visits
twice a year
Cheers
Rich
Gallery updated 11/01/2011
|
|
|
DH2
|
| posted on 18/7/13 at 10:44 AM |
|
|
quote:
Originally posted by RichardK
Are they for sale, let me know to send the money to and I'll tell the address to send them to, it is a UK addy, I have a parts mule that visits
twice a year
Cheers
Rich
Oops, sorry, I managed to miss your previous post.
Yes I still have them - do you mean both the OEM and pillow block bearing?
DH2
|
|
|
RichardK
|
| posted on 18/7/13 at 11:33 AM |
|
|
Yes mate, both bits please, whether I'll ever get around to fitting them is something completely different lol
Do you take PayPal, u2u me your addy if so.
Cheers
Rich
Gallery updated 11/01/2011
|
|
|
Benzo
|
| posted on 18/7/13 at 01:23 PM |
|
|
I'll take the seat rails, can you u2u me with how you would like paid.
|
|
|
DH2
|
| posted on 31/7/13 at 12:01 PM |
|
|
Column bushes/bearings = SOLD.
Seat mount rails = SOLD.
BTTT.
|
|
|
