Printable Version | Subscribe | Add to Favourites
New Topic New Reply
Author: Subject: Aries Locoblade front wishbones/geometry
Lordyplums

posted on 15/7/15 at 08:06 AM Reply With Quote
Aries Locoblade front wishbones/geometry

Hi guys, need a little advice...
Managed to bend the front a couple of weeks ago at a track day. No problems with cutting out the steels and damage, have taken it back to the bulkhead at the lower and to the rear of the scuttle at the top, made up new steels, tacked everything in place, checked all alignments and looking good. Only problem I have is the damage didn't allow me to establish accurate mounting and alignment of wishbone brackets and shock hangers. Shocks shouldn't be too much of a problem but am really hoping that someone could help me out with some advice as itching to get her back up and running.
Thanks

View User's Profile E-Mail User View All Posts By User U2U Member
phelpsa

posted on 15/7/15 at 08:26 AM Reply With Quote
Mine will be at Llandow on Saturday if you want to come and take some measurements?
View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
Lordyplums

posted on 17/7/15 at 12:55 PM Reply With Quote
In hoping to be able to make it to Llandow if that's ok? Will have to make sure I get out of work somehow...
Thanks

View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Reply


go to top






Website design and SEO by Studio Montage

All content 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [ 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.