Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: OEM Ford TPS Wiring
Ron Lang

posted on 5/3/17 at 05:14 PM Reply With Quote
OEM Ford TPS Wiring

Time to start giving back to the forum as well as asking questions!

For info, I believe the wiring for the OEM TPS for the throttle body used on the blacktop zetec with plenum setup is as follows:

Pin A: Ground (to ECU Pin 30)
Pin B: Signal (to ECU pin 8)
Pin C: 5v (to ECU pin 9)

Pin letters are shown on the side of the plug socket and ECU PIN numbers relate the emerald.

Hope this helps someone.






View User's Profile View All Posts By User U2U Member
big_wasa

posted on 5/3/17 at 06:03 PM Reply With Quote

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.