Ben_Copeland
|
posted on 8/10/19 at 12:17 PM |
|
|
Another Garage Clearout
Few bits leftover
Type 9 gearstick with alloy knob. £20
Wheel spacer 20mm with 70mm centre bore. £15
Sch10s 1-1/2” stainless steam pipe for use in turbo manifolds enough to make 2 manifolds. 1 part built manifold and box of extras. Over £200 worth.
£100
Z20LET stainless exhaust flange, not used, but has been welded too. £10
Set of Ford fitment alloys and R1R tyres. Been in the garage for a few years. Tyres have a bit of life in them. Alloys are approx Et16 so will make
the car wider. Good for filling wide rear arches. Saxo offset I believe. 4 centre caps (4 bolts) Paints ok, can’t remember the make of them. Couple
have quite a lot of weights on but they were fine on my car. Nice and lightweight. £60
Plus postage at cost. stainless pipe is heavy so suggest collection for Margate.
![](/galpreviews/Sch10s.jpg) ![Sch10s](/gallery/Sch10s.jpg) Sch10s
![](/galpreviews/Schl10ss.jpg) ![Sch10s](/gallery/Schl10ss.jpg) Sch10s
![](/galpreviews/5Spacers.jpg) ![spacers](/gallery/5Spacers.jpg) spacers
![](/galpreviews/type 9 stick.jpg) ![type 9 stick](/gallery/type 9 stick.jpg) type 9 stick
![](/galpreviews/7Wheels.jpg) ![wheels](/gallery/7Wheels.jpg) wheels
![](/galpreviews/2Wheels1.jpg) ![wheels](/gallery/2Wheels1.jpg) wheels
![](/galpreviews/2Wheels2.jpg) ![wheels](/gallery/2Wheels2.jpg) wheels
[Edited on 8/10/19 by Ben_Copeland]
Ben
Locost Map on Google Maps
Z20LET Astra Turbo, into a Haynes
Roadster
Enter Your Details Here
http://www.facebook.com/EquinoxProducts for all your bodywork needs!
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|