Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Constructing air filters
John G

posted on 22/6/21 at 07:02 PM Reply With Quote
Constructing air filters

I have a Phoenix with a ZZR1100 on flat slides and the foam filters are getting past their best. Has anyone experience of making their own foam filters? If you could direct me to a good supplier of foam and a means to construct / glue the foam that would be a good start.
Any manufacturers of blank carbon boxes would be interesting
Jon

View User's Profile View All Posts By User U2U Member
big_wasa

posted on 22/6/21 at 07:36 PM Reply With Quote
Ramair do all sorts of blanks

https://ramair-filters.co.uk/rt2-254-425-ramair-twin-carb-bolt-on-air-filters-with-blank-baseplate-80mm-internal-height/

View User's Profile View All Posts By User U2U Member
MikeR

posted on 23/6/21 at 12:17 PM Reply With Quote
Interested in this as I've got my hands on a damaged filter
View User's Profile View All Posts By User U2U Member
pigeondave

posted on 23/6/21 at 05:27 PM Reply With Quote
Have you tried contacting the manufacturers ?

https://www.itgairfilters.com/page/foam-specifications/

There appears to be many different types of foam that they do. They might sell it through a distributer ?

View User's Profile View All Posts By User U2U Member
David Jenkins

posted on 23/6/21 at 05:42 PM Reply With Quote
This is what I made for my bike carbs - it uses sheet filter material.








The older I get, the better I was...

View User's Profile Visit User's Homepage View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [ 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.