Mike Wood
|
| posted on 5/4/26 at 04:43 PM |
|
|
Roll cage for book chassis - wanted
Any bolt on rear roll cages for a book chassis out there please? UK motorsport compliant tube spec, main hoop, rear brace tubes, diagonal plus a
harness mounting tube. Similar to this, but with a horizontal upper harness mounting tube:
https://www.locostbuilders.co.uk/photos.php?action=showphoto&photo=IMG_6074.jpeg
Perhaps one from an old 750 Motor Club racer when they just ran rear roll cages or one from Aries Motorsport/STM.
Before I get the tape measure out, draw a design, get it made up in cut and bent kit form from Tube Bender and find someone in Scotland to weld it
up.
Thanks
Mike
[Edited on 5/4/26 by Mike Wood]
[Edited on 5/4/26 by Mike Wood]
|
|
|
|
|
jacko
|
| posted on 5/4/26 at 06:06 PM |
|
|
You may find the MK Indy one will fit as the Indy and book chassis was the same .
But please check before buying
Jacko
555
|
|
|
Mike Wood
|
| posted on 5/4/26 at 07:19 PM |
|
|
quote:
Originally posted by jacko
You may find the MK Indy one will fit as the Indy and book chassis was the same .
But please check before buying
Jacko
Jacko
Thanks, that’s a good tip.
Best wishes
Mike
|
|
|
