Gav
|
| posted on 2/3/06 at 09:10 PM |
|
|
Online machining material suppliers?
Ive been looking round the local engineering shops and suppliers and doant have or wont supply in small quantity i need which is some stainless or
ally round bar about 100 mm dia and about 200mm long.
anyone know any online suppliers that do small quantites?
ive looked at chronos but the biggest they do is 27mm
|
|
|
|
|
Wadders
|
| posted on 2/3/06 at 09:18 PM |
|
|
Try here
http://www.metalfast.co.uk/stocks.htm
or if you can wait until Saturday there's usually a stall at Rufforth autojumble selling offcuts, although it's pot luck if they have what
you need or not.
|
|
|
Gav
|
| posted on 2/3/06 at 09:34 PM |
|
|
Im actually heading over to Thirsk to see my parents for the weekend, might organise a little trip out on saturday then 
|
|
|
Gav
|
| posted on 2/3/06 at 09:37 PM |
|
|
http://www.metalfast.co.uk/PolePage.html
ROFL!
|
|
|
JoelP
|
| posted on 2/3/06 at 09:38 PM |
|
|
i fancy rufforth myself, not sure if i have owt planned, might get me ol' pal mark down too. You up for it Alan?!
|
|
|
eddymcclements
|
| posted on 2/3/06 at 10:00 PM |
|
|
Or Smiths Metal Centres. They do aluminium round bar up to...eek...16" in H30.
Cheers,
Eddy
|
|
|
eddymcclements
|
| posted on 2/3/06 at 10:05 PM |
|
|
Just noticed you're in Blackburn. Your best best is Simmalls at Walton Summit, Bamber Bridge. They're only minutes away along the M65 and
will have what you need.
Cheers,
Eddy
|
|
|
Anglia66
|
| posted on 2/3/06 at 11:36 PM |
|
|
These guys can get you virtually any alloy you want if you're prepared to pay.
NOGGIN END
www.nogginend.com
mike@nogginend.com
[Edited on 2/3/06 by Anglia66]
|
|
|
Gav
|
| posted on 2/3/06 at 11:44 PM |
|
|
cheers guys ill check them all out.
|
|
|
