JoelP
|
| posted on 10/4/06 at 12:04 PM |
|
|
pickle
ok, mnr are too busy to make an exhaust before 23rd when i have a trackday. MK want £400 for one, which is a little more than id rather pay. Does
anyone know a place that can make exhausts fast or cheap or both, in yorkshire?! Alternatively, i might make my own, but it would have to be in mild
steel, so not ideal.
|
|
|
|
|
Hammerhead
|
| posted on 10/4/06 at 12:09 PM |
|
|
try mk engineering rather than mk sportscars
|
|
|
JoelP
|
| posted on 10/4/06 at 12:10 PM |
|
|
i did 
|
|
|
fesycresy
|
| posted on 10/4/06 at 12:26 PM |
|
|
Isn't Tony Law up your way ?
-----------------------------------------------------------------------------------------------------
The sooner you fall behind, the more time you'll have to catch up.
|
|
|
carlgeldard
|
| posted on 10/4/06 at 12:46 PM |
|
|
Tony Law is in Stourton Leed, But I bet they are not cheap.
Carl
|
|
|
Hellfire
|
| posted on 10/4/06 at 12:46 PM |
|
|
Raven Exhausts in Sheffield - George is your man...
RAVEN RACING reasonably priced and never too busy!
|
|
|
smart51
|
| posted on 10/4/06 at 01:06 PM |
|
|
The kit car company are not quite in yorkshire but had an exhaust made for me both quickly and cheaply. They got it wrong, making it 26" rather
than 29"  but it did turn out to be 5dB quieter than my old can so I'm happy enough. It wasn't polished though which is
perhaps why it was cheaper than the others I looked at.
|
|
|
JoelP
|
| posted on 10/4/06 at 02:21 PM |
|
|
tony law have a 5 week wait but estimated £350. My friend put me in touch with a bloke called baz, who needed 8 weeks! So my target of 1 week looks a
little unlikely! Might end up taking the subaru rather than the locost at this rate 
The alternative is dairy bends and a tig, but that seems a little daunting. I learn fast, but possibly not that fast! 
ps its a manifold i need, not a can. Ive spotted a nice carbon race can on fleebay.
Raven racing didnt answer the phone, but their website suggests they just do fancy cans. Am i wrong?!
Any more ideas?
|
|
|
Ben Smith
|
| posted on 10/4/06 at 03:22 PM |
|
|
Might be worth giving RAW a call. Not sure if they've done a ZX9 but they usually have a few manifolds in stock. Got my R1 one from them off the
shelf. They also do a nice large silencer. Not the lightest but very quiet.
Ben.
R1 STRIKER.
|
|
|
JoelP
|
| posted on 10/4/06 at 03:46 PM |
|
|
good idea that, but it seems they dont stock them. The chap who answered the phone sounded like the cleaner though, didnt know much, so maybe the chap
in the background just got bored! I'll try STM too, im still hopeful
|
|
|
stevebubs
|
| posted on 10/4/06 at 04:12 PM |
|
|
What engine is it for? Do you want bespoke or off the shelf?
You'll often find Fisher Sports cars have std exhausts off the shelf, as (I guess) will ST etc?
|
|
|
JoelP
|
| posted on 10/4/06 at 04:41 PM |
|
|
its for a zx9 engine, i just want any manifold that fits the engine, i can chop the car to match.
|
|
|
Gav
|
| posted on 10/4/06 at 07:25 PM |
|
|
quote:
Originally posted by JoelP
I can chop the car to match.
Like a challenge eh Joel?
|
|
|
JoelP
|
| posted on 10/4/06 at 08:10 PM |
|
|
lav it!
|
|
|
INDY BIRD
|
| posted on 10/4/06 at 08:19 PM |
|
|
What about tiger they do most of there bec with the zx9 so worth a call to jim dudley may have them on the shelf???
|
|
|
.jpg){kind=avatar}
