Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: barnett clutches???
mark.s

posted on 11/6/07 at 08:28 PM Reply With Quote
barnett clutches???

have i got my wires crossed here or am i right in thinking that the barnett clutches are crap, but the springs are good
any advice please

cheers, mark






View User's Profile View All Posts By User U2U Member
scotlad
Contributor






Posts 781
Registered 30/9/03
Location Edinburgh
Member Is Offline

Photo Archive Go!
Building: Built MK Indy Blade, RH 2b Zetec, rebuilding locos

posted on 11/6/07 at 08:43 PM Reply With Quote
Ditto Chris's comments. EBC awful- from experience with kevlar plates. Barnett ones mucho better.

In my opinion of course

View User's Profile E-Mail User View All Posts By User U2U Member
mark.s

posted on 11/6/07 at 08:45 PM Reply With Quote
thats it EBC i knew one of them was a snotter, thank god i asked, cheers chris

[Edited on 11/6/07 by mark.s]






View User's Profile View All Posts By User U2U Member
G.Man

posted on 12/6/07 at 04:53 AM Reply With Quote
my barnett plates died in about 50kms

the lining came away from the plates!







Opinions are like backsides..
Everyone has one, nobody wants to hear it and only other peoples stink!

View User's Profile View All Posts By User U2U Member
smart51

posted on 12/6/07 at 07:23 AM Reply With Quote
I have a barnet pressure plate which is just fine. I needed to bolster the springs with washers to give a bit more pressure but its been fine since
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [ 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.