Wolf1e
|
| posted on 28/2/16 at 09:55 PM |
|
|
seat mounting and raising them
Hi guys
What seat runners are peps using for grp bucket seats? Dual locking or only locking on one side?
Also do any of you raise the seats up slightly so the rear harness holes are more inline with the harness fixings on the chassis?
Thanks guys
Wolfie
|
|
|
|
|
Wolf1e
|
| posted on 5/3/16 at 02:20 PM |
|
|
Hi guys
This is what I mean. Are the seats high enough to pass iva or will I have to raise them slightly?
 
seat
 
Description
 
Description
 
Description
 
Description
 
Description
 
Description
Thanks
Wolfie
[Edited on 5/3/16 by Wolf1e]
|
|
|
big-vee-twin
|
| posted on 6/3/16 at 09:59 AM |
|
|
The seatbelt fixings have to be 450mm above the reference plain which is silghtly higher than the bottom of your seat. I set mine at 500.
The belts the need to pass through the holes in the seat without touching the seat when you are sat in the car with belt on.
Otherwise seat becomes a structural component and needs proof of testing which you can't prove so it fails.
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
