fimi7
|
| posted on 7/12/12 at 03:23 PM |
|
|
Mounting panels on tunnel
This is really a request for pics. I am about to start mounting the plastic panels from MK to my tunnel and wanted to see how others have done it.
I see a few with the Ali strips running on each side, but would love to see how its mounted underneath.
--- Ali
|
|
|
|
|
-matt
|
| posted on 7/12/12 at 04:11 PM |
|
|
I used a couple of riv nuts onto the chassis tubes.
|
|
|
whitestu
|
| posted on 7/12/12 at 04:21 PM |
|
|
On mine the side panels were riveted with large head rivets to the chassis rails and on top screwed down using countersunk self tappers and the ali
angle from MK.
You can just about see it here
 
SVA4
Stu
|
|
|
big-vee-twin
|
| posted on 7/12/12 at 04:52 PM |
|
|
Sides will be tiger seal and pop rivets.
Top will be riv-nuts and pan head Allen screws. The top has been shaped to have radius on top edges.
Sides and top will be covered in Di-Noc.
[img]
 
Tunnel construction
[/img]
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
fimi7
|
| posted on 10/12/12 at 06:43 AM |
|
|
Thanks, that helps
--- Ali
|
|
|
