iceman26
|
| posted on 6/8/08 at 10:45 AM |
|
|
racetech mirrors
has anyone got pictures of the way they have mounted the centre racetech mirror and what you have to cover for sva
thanks
|
|
|
|
|
Howlor
|
| posted on 6/8/08 at 10:49 AM |
|
|
IIRC The racetech will not pass SVA as it does not dip. I may be wrong though.
Also isn't the edge radius an issue.
Someone will be along with the info.
|
|
|
Humbug
|
| posted on 6/8/08 at 11:06 AM |
|
|
AFAIK inability to dip is not an SVA issue... the main problem would be radius on the edge lip
|
|
|
mike smith1
|
| posted on 6/8/08 at 11:34 AM |
|
|
Mine passed sva no problem, just found a rubber cover to go over the nut and some light thin u trim lightly tacked to the mirror!
Mike
|
|
|
JohnN
|
| posted on 6/8/08 at 12:02 PM |
|
|
u-trim stuck around the edge of the mirror, electrical shrink tube over nut and shrunk on.
Ability to dip isn't an SVA issue
|
|
|
richardh
|
| posted on 6/8/08 at 02:23 PM |
|
|
mine passed without any problem as was
|
|
|
.JPG)
