Printable Version | Subscribe | Add to Favourites
<<  1    2  >>
New Topic New Poll New Reply
Author: Subject: How many are there?
Northy

posted on 1/12/03 at 09:01 PM Reply With Quote
How many are there?

How many Avon builders do we have on here?

What stage are you at?

Cheers





Graham


Website under construction. Help greatfully received as I don't really know what I'm doing!


"If a man says something in the woods and there are no women there, is he still wrong?"

Built 2L 8 Valve Vx Powered Avon

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
AvonBelgium

posted on 1/12/03 at 11:52 PM Reply With Quote
Hi,
I'm building an Avon
Paneling 90% ready
Rear suspension ready
Loom in
Handbrake ready
Brake lines in
Fuel lines in
2.4 ratio steering rack and other steering parts in

Front suspension needs to be powder coated, and then can me mounted.
Just need to make a centring ring for the front brake discs ( using the Sierra calipers and a volvo disc on the cortina upright)
Petrol tank is cut and ready to weld
Finalising the design for the pcb board for my Audi 100 gauges
Alu side panel ready

At this moment I try to get all the body parts ready

And an escort RS 2000 16v 150 BHP engine is almost ready to be mounted ( need to modify the oilpump pick-up, because I took of 35 mm from the oil sump), and also 35 mm from the MT 75 bellhousing)

Have some holidays at the end of the month, and try to get the car on his wheels with the engine in, and all the body panels ready to be painted

AvonBelgium

View User's Profile E-Mail User View All Posts By User U2U Member
marshall

posted on 2/12/03 at 07:23 AM Reply With Quote
hi i am a tiger avon builder this is what it looks like at the mow Rescued attachment small.JPG
Rescued attachment small.JPG

View User's Profile E-Mail User View All Posts By User U2U Member
DaveFJ

posted on 2/12/03 at 08:59 AM Reply With Quote
Just getting started - chassis painted last weekend - start panelling soon.

So I expect lots of (constructive) hints and tips from you guys!

Donor gear is mostly prepped though...





Dave

"In Support of Help the Heroes" - Always

View User's Profile Visit User's Homepage View All Posts By User U2U Member
Lightning

posted on 2/12/03 at 08:26 PM Reply With Quote
Buiding Avon.

Suspension all in, discs on rear. All pannelling done. Honda Fireblade engine in on fabricated cradle. Radiator and hoses connected.
Brake lines are in on bias link brakes. Clutch connected. Wiring loom from bike in and in the process of extending loom for lights etc.
Also making paddle shift gear change with the bike switchgear built in. Awaiting delivery of the propshaft.
Bought seats at Exeter show and all lights
Wheels refurbished with Yoko tyres.
Modifying roll bar

I want a petrol tank ali or stainless......Any offers?

Just bought push bike speed other gauges to be off the bike

Body will go on as late as possible





Steve

View User's Profile E-Mail User View All Posts By User U2U Member
dblissett

posted on 2/12/03 at 10:08 PM Reply With Quote
building avon ish

i am building a avon +4
just finished rear wish bones and suspension now to the front
is anyone else making there own chasis from the book its not easy lots of dims missing
cheers dave blissett

View User's Profile E-Mail User View All Posts By User U2U Member
marshall

posted on 3/12/03 at 08:04 AM Reply With Quote
i got tiger to do mine to save me time and as i am no good a welding
View User's Profile E-Mail User View All Posts By User U2U Member
soggy

posted on 5/12/03 at 11:12 PM Reply With Quote
avon builder

Mine's 80% finished it will be running a modified 1.8 cvh and its painted MG trophy blue.my target it to be finished in time for stoneleigh!





if at first u dont succeed use a bigger hammer!

View User's Profile View All Posts By User U2U Member
punker

posted on 13/12/03 at 01:02 PM Reply With Quote
i'm building a avon. using a 2lt inj pinto. got chassis done minus suspension brackets as i want to make my wishbones (have materal) 1st. got to strip engine and rebuild. still lots to do....

started in may, stopped in august as we moved house and wont start until march as thats when we finish doing up the house.

one day it'll be on the road.............

View User's Profile E-Mail User View All Posts By User U2U Member
Viper

posted on 13/12/03 at 04:03 PM Reply With Quote
quote:
Originally posted by marshall
i got tiger to do mine to save me time and as i am no good a welding


Doesn't stop Tiger...






View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
robinbastd

posted on 13/12/03 at 11:05 PM Reply With Quote
That was a long time coming, Viper- busy re welding by any chance?
Ian





Only a dead fish swims with the tide.

http://smuttygifts.com/

View User's Profile Visit User's Homepage View All Posts By User U2U Member
dblissett

posted on 14/12/03 at 11:34 AM Reply With Quote
welding ?

if you think the weldings bad you should try reading their drawings you end up working it out yourself
ps i am a engineer so i should be able to read drawings
cheers dave blissett

View User's Profile E-Mail User View All Posts By User U2U Member
Viper

posted on 14/12/03 at 08:41 PM Reply With Quote
quote:
Originally posted by robinbastd
That was a long time coming, Viper- busy re welding by any chance?
Ian


Coz i have to check with my laywer before i say anything....






View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
DARRYL

posted on 14/12/03 at 09:06 PM Reply With Quote
Avons being built

Stepson and myself bought a comprehensive kit in Feb 03- just a body fitting stage- not looking too good tho. I spoke to Jim Dudley 2 weeks ago to complain over the car etc. HE told me they had SOLD 250- yes 250 Avons to date!............... where the hell are they? Red one at Donny this year, Yellow one at Harrogate this year. So Jim where's the rest?
View User's Profile View All Posts By User U2U Member
Avoneer

posted on 15/12/03 at 01:09 PM Reply With Quote
I also complained about the bodywork, especially one wheel arch being 1 inch wider across the front than the other and a few other bits, and have a written responce. To sum up, the reply was all the bodywork on all Avons is the same! (Very useful) - but we will refund all of your money if you refund the kit.
Good car, shame it is let down by the attrocious bodywork.
Darryl - where are you up to?
I live in Dewsbury, but go to Bury every weekend to drop of my daughter - that's not far from Accrington is it...Especially if I go to have a nosey at Winfields...

[Edited on 15/12/03 by Avoneer]

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
DARRYL

posted on 15/12/03 at 10:51 PM Reply With Quote
The chassis is at rolling stage, loom is in. Basically it's a driveable chassis. The next step is fitting the body, then it should all be downhill from then ( big grin ) If you want a peep give us a U2U.
View User's Profile View All Posts By User U2U Member
tractorboy

posted on 1/1/04 at 06:14 PM Reply With Quote
avon builder in suffolk/cambs boarder.95% there just ironing out electrical problems and cycle wings to fit then trying to make best of body work.had it running sounds awesome(one of the few bits thats brought a big cheesy grin to my face)hopefully get in MOTed by end of jan. then hopefully sva feb /march Rescued attachment mag_026.jpg
Rescued attachment mag_026.jpg

View User's Profile E-Mail User View All Posts By User U2U Member
Mark Allanson

posted on 1/1/04 at 10:25 PM Reply With Quote
"ps i am a engineer so i should be able to read drawings"

Dave, you could always resort to tigernometry to work it out





If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation

View User's Profile Visit User's Homepage View All Posts By User U2U Member
DaveFJ

posted on 2/1/04 at 05:23 PM Reply With Quote
Looking good 'tractorboy'

u have U2U





Dave

"In Support of Help the Heroes" - Always

View User's Profile Visit User's Homepage View All Posts By User U2U Member
dblissett

posted on 2/1/04 at 07:09 PM Reply With Quote
drawings

hello mark
so now i know which pussy did the "drawings"

View User's Profile E-Mail User View All Posts By User U2U Member
keith

posted on 20/7/04 at 08:08 PM Reply With Quote
avon builders how many are there

hi,myself & my brother in law are building avon"s both with kawasaki zx9 ninja engines both kawasaki green body work(or should i say tissue paper)they are both running and should be ready for donnington,been on them since march last year. look forward to a bit of banter cheers keith&larry.
View User's Profile View All Posts By User U2U Member
andrew.carwithen

posted on 21/7/04 at 08:11 PM Reply With Quote
Bought mine second-hand part-built. Basically rolling chassis stage. though I'm having to dismantle and start again. Previous owner seems to have used ally as thin as tissue paper for panelling and has butchered/hacked notorious Avon bodywork - probably in sheer frustration - to get it to fit. Can't decide if its worth repairing or replacing with new body (especially as it's british racing green - not my favourite colour) though I may still end up with same problem of getting it to fit!
View User's Profile View All Posts By User U2U Member
Andrew Bause

posted on 24/7/04 at 11:13 PM Reply With Quote
How many are there?

Hi All

Have been building my VX 16v Powered AVON since April 04 It's now 90% complete and so far has presented very few problems! Even the bodywork fitted fine. Rescued attachment tiger27 003.jpg
Rescued attachment tiger27 003.jpg






We have been doing so much with so little for so long - Now we can do anything with nothing!

View User's Profile View All Posts By User U2U Member
Northy

posted on 25/7/04 at 07:23 AM Reply With Quote
I thought mine was the only VX powered Avon

Only joking! Glad there is someone else with taste I'd like to know some more details and see some more pictures!

Cheers





Graham


Website under construction. Help greatfully received as I don't really know what I'm doing!


"If a man says something in the woods and there are no women there, is he still wrong?"

Built 2L 8 Valve Vx Powered Avon

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
Jeffers_S13

posted on 11/8/04 at 11:46 AM Reply With Quote
quote:
Originally posted by Andrew Bause
Hi All

Have been building my VX 16v Powered AVON since April 04 It's now 90% complete and so far has presented very few problems! Even the bodywork fitted fine.


Did you buy a chassis from Tiger ? do you have the illusive 'new' bodywork ? if there is such a thing ? Also what wing mirrors are those ?

Thanks

James

View User's Profile View All Posts By User U2U Member
<<  1    2  >>
New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.